\relax 
\@writefile{toc}{\contentsline {part}{\uppercase {i}\hspace  {1em}2dF Description}{5}}
\@writefile{toc}{\contentsline {chapter}{\numberline {1}Hardware Description}{6}}
\@writefile{lof}{\addvspace {10\p@ }}
\@writefile{lot}{\addvspace {10\p@ }}
\@writefile{toc}{\contentsline {section}{\numberline {1.1}The Corrector}{6}}
\newlabel{Corrector}{{1.1}{6}}
\@writefile{toc}{\contentsline {section}{\numberline {1.2}The Fibre Positioner}{6}}
\newlabel{Positioner}{{1.2}{6}}
\newlabel{topend}{{1}{7}}
\@writefile{lof}{\contentsline {figure}{\numberline {1.1}{\ignorespaces Schematic of 2dF, Corrector, and ADC}}{7}}
\newlabel{2dftel}{{1}{8}}
\@writefile{lof}{\contentsline {figure}{\numberline {1.2}{\ignorespaces Labelled picture of 2dF on the telescope.}}{8}}
\newlabel{corrector_fig}{{1.1}{9}}
\@writefile{lof}{\contentsline {figure}{\numberline {1.3}{\ignorespaces Schematic diagram of the 2dF Prime Focus corrector in cross-section. The lower two lens elements are the prismatic doublets making up the ADC; these are the first and second elements of the corrector in the light path.}}{9}}
\newlabel{2dfDistWave}{{1.1}{10}}
\@writefile{lof}{\contentsline {figure}{\numberline {1.4}{\ignorespaces Wavelength Dependence of Radial Distortion}}{10}}
\@writefile{toc}{\contentsline {section}{\numberline {1.3}The Fibres}{10}}
\newlabel{Fibres}{{1.3}{10}}
\@writefile{lof}{\contentsline {figure}{\numberline {1.5}{\ignorespaces 2dF Robot Positioner}}{11}}
\newlabel{2dfpos}{{1.5}{11}}
\@writefile{lof}{\contentsline {figure}{\numberline {1.6}{\ignorespaces 2dF Field Plate}}{12}}
\newlabel{2dfplate}{{1.6}{12}}
\@writefile{lof}{\contentsline {figure}{\numberline {1.7}{\ignorespaces Variation of Fibre Diameter with Field Radius}}{13}}
\newlabel{2dfImageSize}{{1.7}{13}}
\@writefile{lof}{\contentsline {figure}{\numberline {1.8}{\ignorespaces 2dF Button}}{13}}
\newlabel{2dfButton}{{1.8}{13}}
\@writefile{lof}{\contentsline {figure}{\numberline {1.9}{\ignorespaces Picture of Fibres on the Fieldplate}}{14}}
\newlabel{fibplate}{{1.9}{14}}
\@writefile{lof}{\contentsline {figure}{\numberline {1.10}{\ignorespaces Closeup of Single Fibre on the Fieldplate}}{15}}
\newlabel{fibclose}{{1.10}{15}}
\@writefile{lof}{\contentsline {figure}{\numberline {1.11}{\ignorespaces Guide Bundle Layout}}{16}}
\newlabel{guidebundle}{{1.11}{16}}
\@writefile{toc}{\contentsline {section}{\numberline {1.4}The Spectrographs}{16}}
\newlabel{Spectrographs}{{1.4}{16}}
\@writefile{lof}{\contentsline {figure}{\numberline {1.12}{\ignorespaces Picture of 2dF Spectrographs}}{17}}
\newlabel{specpic}{{1.12}{17}}
\@writefile{toc}{\contentsline {chapter}{\numberline {2}Software and Controls}{19}}
\@writefile{lof}{\addvspace {10\p@ }}
\@writefile{lot}{\addvspace {10\p@ }}
\@writefile{toc}{\contentsline {section}{\numberline {2.1}Overall System Description}{19}}
\@writefile{toc}{\contentsline {section}{\numberline {2.2}Hardware Interfaces}{19}}
\@writefile{lof}{\contentsline {figure}{\numberline {2.1}{\ignorespaces 2df Computer Systems}}{20}}
\newlabel{2dfsys}{{2.1}{20}}
\@writefile{lof}{\contentsline {figure}{\numberline {2.2}{\ignorespaces Simplified Diagram of 2dF Software Structure}}{21}}
\newlabel{2dfSoftware}{{2.2}{21}}
\@writefile{toc}{\contentsline {section}{\numberline {2.3}Software Overview}{21}}
\@writefile{toc}{\contentsline {part}{\uppercase {ii}\hspace  {1em}Preparing Observing Programs for 2dF}{22}}
\@writefile{toc}{\contentsline {chapter}{\numberline {3}Preparing Observing Projects}{23}}
\@writefile{lof}{\addvspace {10\p@ }}
\@writefile{lot}{\addvspace {10\p@ }}
\@writefile{toc}{\contentsline {section}{\numberline {3.1}Reference Stars}{23}}
\@writefile{toc}{\contentsline {section}{\numberline {3.2}Magnitude Effects}{24}}
\@writefile{toc}{\contentsline {section}{\numberline {3.3}Systematic Plate Distortions}{24}}
\@writefile{toc}{\contentsline {section}{\numberline {3.4}Proper Motions}{25}}
\@writefile{toc}{\contentsline {section}{\numberline {3.5}Choice of Fiducial stars}{25}}
\@writefile{toc}{\contentsline {chapter}{\numberline {4}Configuration Input File Format}{27}}
\@writefile{lof}{\addvspace {10\p@ }}
\@writefile{lot}{\addvspace {10\p@ }}
\newlabel{configuration}{{4}{27}}
\@writefile{toc}{\contentsline {section}{\numberline {4.1}File Format}{27}}
\@writefile{toc}{\contentsline {section}{\numberline {4.2}Example Input File}{28}}
\@writefile{toc}{\contentsline {chapter}{\numberline {5}The Configuration Program}{29}}
\@writefile{lof}{\addvspace {10\p@ }}
\@writefile{lot}{\addvspace {10\p@ }}
\newlabel{config}{{5}{29}}
\@writefile{toc}{\contentsline {section}{\numberline {5.1}Introduction}{29}}
\@writefile{toc}{\contentsline {section}{\numberline {5.2}Obtaining and Installing Configure}{29}}
\@writefile{toc}{\contentsline {section}{\numberline {5.3}Running Configure}{29}}
\@writefile{toc}{\contentsline {section}{\numberline {5.4}Opening Files}{30}}
\@writefile{toc}{\contentsline {section}{\numberline {5.5}Converting Files}{30}}
\@writefile{toc}{\contentsline {section}{\numberline {5.6}Setting the Wavelength}{30}}
\@writefile{toc}{\contentsline {section}{\numberline {5.7}Setting the Field Plate}{30}}
\@writefile{lof}{\contentsline {figure}{\numberline {5.1}{\ignorespaces Configuration Main Window Immediately after Opening a File}}{31}}
\newlabel{2dfConfigMain}{{5.1}{31}}
\@writefile{toc}{\contentsline {section}{\numberline {5.8}Overview of Allocation Procedure}{32}}
\@writefile{toc}{\contentsline {section}{\numberline {5.9}The Allocation Procedure in more detail}{32}}
\@writefile{toc}{\contentsline {subsection}{\numberline {5.9.1}Target Priorities}{33}}
\@writefile{toc}{\contentsline {subsection}{\numberline {5.9.2}The Allocation Window}{33}}
\@writefile{toc}{\contentsline {subsection}{\numberline {5.9.3}Sky fibres}{33}}
\@writefile{lof}{\contentsline {figure}{\numberline {5.2}{\ignorespaces Allocation Parameters Dialog Box}}{34}}
\newlabel{2dfAllocation}{{5.2}{34}}
\@writefile{toc}{\contentsline {section}{\numberline {5.10}Checking Allocation Validity}{34}}
\newlabel{sec-check-alloc}{{5.10}{34}}
\@writefile{toc}{\contentsline {section}{\numberline {5.11}Manual Allocation of Fibres}{35}}
\newlabel{sec-config-manual}{{5.11}{35}}
\@writefile{lof}{\contentsline {figure}{\numberline {5.3}{\ignorespaces The Configuration Graphical Display}}{36}}
\newlabel{2dfConfigField}{{5.3}{36}}
\@writefile{toc}{\contentsline {section}{\numberline {5.12}The Graphical Display}{37}}
\@writefile{toc}{\contentsline {section}{\numberline {5.13}Saving a Configuration}{37}}
\@writefile{toc}{\contentsline {section}{\numberline {5.14}Batch Mode}{37}}
\newlabel{sec-batch-mode}{{5.14}{37}}
\@writefile{toc}{\contentsline {section}{\numberline {5.15}Command Line Switches}{37}}
\newlabel{sec-configure-flags}{{5.15}{37}}
\@writefile{toc}{\contentsline {section}{\numberline {5.16}Common Problems}{38}}
\@writefile{toc}{\contentsline {section}{\numberline {5.17}Tips for Running Configure}{38}}
\@writefile{toc}{\contentsline {part}{\uppercase {iii}\hspace  {1em}Observing with 2dF}{39}}
\@writefile{toc}{\contentsline {chapter}{\numberline {6}The 2dF Software System}{40}}
\@writefile{lof}{\addvspace {10\p@ }}
\@writefile{lot}{\addvspace {10\p@ }}
\@writefile{toc}{\contentsline {section}{\numberline {6.1}Starting Up the 2dF System}{40}}
\@writefile{toc}{\contentsline {section}{\numberline {6.2}Overview of Software}{40}}
\@writefile{toc}{\contentsline {section}{\numberline {6.3}The Control Task}{41}}
\@writefile{toc}{\contentsline {subsection}{\numberline {6.3.1}Positioner Control}{41}}
\@writefile{lof}{\contentsline {figure}{\numberline {6.1}{\ignorespaces The Control Task Main Window - An individual control window for each of the six subsystems can be brought up by clicking on the {\bf  more} button s}}{42}}
\newlabel{2dfControlWindow}{{6.1}{42}}
\@writefile{lof}{\contentsline {figure}{\numberline {6.2}{\ignorespaces The Positioner Control window --- This is obtained by clicking on the {\bf  more} button in the Positioner section of the main Control Task. window}}{43}}
\newlabel{PosControlWindow}{{6.2}{43}}
\@writefile{lof}{\contentsline {figure}{\numberline {6.3}{\ignorespaces The Telescope Control window --- This is obtained by clicking on the {\bf  more} button in the Telescope section of the main Control Task window}}{44}}
\newlabel{TelControlWindow}{{6.3}{44}}
\@writefile{toc}{\contentsline {subsection}{\numberline {6.3.2}Telescope Control}{44}}
\@writefile{toc}{\contentsline {subsection}{\numberline {6.3.3}CCD Control}{44}}
\@writefile{lof}{\contentsline {figure}{\numberline {6.4}{\ignorespaces The CCD Control window --- This is obtained by clicking on the {\bf  more} button in the CCD section of the main Control Task window}}{45}}
\newlabel{CcdControlWindow}{{6.4}{45}}
\@writefile{toc}{\contentsline {subsection}{\numberline {6.3.4}ADC Control}{46}}
\@writefile{toc}{\contentsline {subsection}{\numberline {6.3.5}Autoguider Control}{46}}
\@writefile{toc}{\contentsline {subsection}{\numberline {6.3.6}Spectrograph Control}{46}}
\@writefile{toc}{\contentsline {section}{\numberline {6.4}FPI Control}{46}}
\@writefile{lof}{\contentsline {figure}{\numberline {6.5}{\ignorespaces The ADC Control Window -- This is obtained by clicking on the {\bf  more} button in the ADC section of the main Control Task window}}{47}}
\newlabel{AdcWindow}{{6.5}{47}}
\@writefile{lof}{\contentsline {figure}{\numberline {6.6}{\ignorespaces The Spectrograph Control window --- This is obtained by clicking on the {\bf  more} button in the Spectrograph section of the main Control Task window}}{48}}
\newlabel{SpectControlWindow}{{6.6}{48}}
\@writefile{lof}{\contentsline {figure}{\numberline {6.7}{\ignorespaces The FPI control task window --- used for imaging stars in the focal plane of 2dF}}{49}}
\newlabel{FPIControlWindow}{{6.7}{49}}
\@writefile{toc}{\contentsline {chapter}{\numberline {7}Observing Procedure}{50}}
\@writefile{lof}{\addvspace {10\p@ }}
\@writefile{lot}{\addvspace {10\p@ }}
\newlabel{ObsChap}{{7}{50}}
\@writefile{toc}{\contentsline {section}{\numberline {7.1}Outline of Observing Procedure}{50}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.1.1}Preparation during the afternoon}{50}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.1.2}Procedure during the night}{50}}
\@writefile{toc}{\contentsline {section}{\numberline {7.2}Centering a Star in the FPI}{51}}
\newlabel{centering-a-star}{{7.2}{51}}
\@writefile{toc}{\contentsline {section}{\numberline {7.3}Running the ADC}{52}}
\newlabel{sec-run-adc}{{7.3}{52}}
\@writefile{toc}{\contentsline {section}{\numberline {7.4}Telescope Focus}{52}}
\newlabel{sec-tel-focus}{{7.4}{52}}
\@writefile{toc}{\contentsline {section}{\numberline {7.5}Pointing Calibration}{53}}
\newlabel{sec-pointing}{{7.5}{53}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.5.1}Measuring the FPI/Plate offsets}{53}}
\newlabel{fpi-plate-offsets}{{7.5.1}{53}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.5.2}The Plate-Plate offset}{54}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.5.3}Measuring The Pointing Model}{54}}
\@writefile{toc}{\contentsline {section}{\numberline {7.6}Astrometric Calibration (`POSCHECK')}{55}}
\newlabel{sec-ast-cal}{{7.6}{55}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.6.1}Calibration Star Fields}{55}}
\newlabel{calib-fields}{{7.6.1}{55}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.6.2}Preparing for Calibration}{56}}
\newlabel{prepcal}{{7.6.2}{56}}
\newlabel{sec-second-plate}{{6}{56}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.6.3}Automatic Calibration}{57}}
\newlabel{autocal}{{7.6.3}{57}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.6.4}Summary}{58}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.6.5}Manual Calibration}{58}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.6.6}Reducing the Calibration Run}{58}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.6.7}Manually Reducing the Calibration Run on a Unix System}{58}}
\@writefile{toc}{\contentsline {section}{\numberline {7.7}The Declination Problem}{59}}
\newlabel{sec-dec-problem}{{7.7}{59}}
\@writefile{toc}{\contentsline {section}{\numberline {7.8}Setting Up a Field}{59}}
\newlabel{sec-setup-field}{{7.8}{59}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.8.1}Preliminary Requirements}{59}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.8.2}Running the Setup}{60}}
\@writefile{toc}{\contentsline {subsubsection}{Problems?}{60}}
\@writefile{toc}{\contentsline {section}{\numberline {7.9}Acquiring Fields}{60}}
\newlabel{sec-acq-field}{{7.9}{60}}
\@writefile{toc}{\contentsline {section}{\numberline {7.10}Taking Calibration and Data Frames}{61}}
\newlabel{sec-cal-frames}{{7.10}{61}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.10.1}Typical Observing Sequence}{61}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.10.2}BIAS frames}{62}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.10.3}DARK frames}{62}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.10.4}Long Slit Flat Fields}{62}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.10.5}Multi-Fibre Flat Fields}{62}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.10.6}Wavelength Calibration Frames (ARCs)}{63}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.10.7}Object Frames}{63}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.10.8}Offset Sky Frames}{63}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.10.9}Standard Stars}{64}}
\@writefile{toc}{\contentsline {subsubsection}{Outline of Procedure}{64}}
\@writefile{toc}{\contentsline {subsubsection}{Time Requirements}{64}}
\@writefile{toc}{\contentsline {subsubsection}{Useful Information}{64}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.10.10}Observing Overheads and Minimum Calibration Requirements}{65}}
\@writefile{lot}{\contentsline {table}{\numberline {7.1}{\ignorespaces Parameters for the 2dF TEK CCDs}}{65}}
\newlabel{readout}{{7.1}{65}}
\@writefile{toc}{\contentsline {section}{\numberline {7.11}Running the Autoguider}{65}}
\newlabel{sec-run-auto}{{7.11}{65}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.11.1}Starting the Autoguider}{65}}
\@writefile{lot}{\contentsline {table}{\numberline {7.2}{\ignorespaces Arc \& Flat Setups and Exposure Times}}{66}}
\newlabel{arctimes}{{7.2}{66}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.11.2}Field setup}{66}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.11.3}Confirming basic operation}{66}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.11.4}Setting up for guiding}{66}}
\@writefile{toc}{\contentsline {subsubsection}{Independent configuration}{67}}
\@writefile{toc}{\contentsline {subsubsection}{Flat fielding}{67}}
\@writefile{toc}{\contentsline {subsubsection}{Disabling fibres}{67}}
\@writefile{toc}{\contentsline {subsubsection}{Sky frame}{68}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.11.5}Guiding}{68}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.11.6}Options}{68}}
\@writefile{toc}{\contentsline {subsubsection}{Graphing offsets}{68}}
\@writefile{toc}{\contentsline {subsubsection}{Freeze mode}{68}}
\@writefile{toc}{\contentsline {subsubsection}{Guide Mode}{68}}
\@writefile{toc}{\contentsline {subsubsection}{Logging}{69}}
\@writefile{toc}{\contentsline {subsubsection}{Settings}{69}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.11.7}Shutting Down}{69}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.11.8}Operation}{69}}
\@writefile{toc}{\contentsline {subsection}{\numberline {7.11.9}Quantex Sync problems}{69}}
\@writefile{toc}{\contentsline {part}{\uppercase {iv}\hspace  {1em}2dF Data Reduction System}{71}}
\@writefile{toc}{\contentsline {chapter}{\numberline {8}Data Reduction}{72}}
\@writefile{lof}{\addvspace {10\p@ }}
\@writefile{lot}{\addvspace {10\p@ }}
\@writefile{toc}{\contentsline {section}{\numberline {8.1}Introduction}{72}}
\@writefile{toc}{\contentsline {section}{\numberline {8.2}Obtaining and Installing 2dfdr}{72}}
\@writefile{toc}{\contentsline {section}{\numberline {8.3}Data Reduction System Setup}{72}}
\@writefile{toc}{\contentsline {section}{\numberline {8.4}Preparing Data for Reduction}{73}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.4.1}Files Required}{73}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.4.2}Converting FITS files}{74}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.4.3}Old 2dF Data}{74}}
\@writefile{toc}{\contentsline {section}{\numberline {8.5}Running the Data Reduction System}{74}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.5.1}Startup Problems}{74}}
\@writefile{lof}{\contentsline {figure}{\numberline {8.1}{\ignorespaces The 2dF data reduction system main window}}{75}}
\newlabel{fig-drs}{{8.1}{75}}
\@writefile{toc}{\contentsline {section}{\numberline {8.6}Data Reduction - Quick Guide}{75}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.6.1}The User Interface}{75}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.6.2}Reducing Data}{75}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.6.3}Plotting Data}{76}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.6.4}Did it Work?}{76}}
\newlabel{diditwork}{{8.6.4}{76}}
\@writefile{lof}{\contentsline {figure}{\numberline {8.2}{\ignorespaces Typical result from the {\bf  Plot Tram Map...} option (after zooming the plot several times using the Z key). The tram lines run through the centre of the data on which they are overlaid.}}{77}}
\newlabel{fig-tlmap}{{8.2}{77}}
\@writefile{lof}{\contentsline {figure}{\numberline {8.3}{\ignorespaces Correct appearance of a reduced 2dF arc exposure. The lines run straight up the image as all fibres have been rebinned to the same wavelength scale. Compare with figure\nobreakspace  {}8.4\hbox {}.}}{78}}
\newlabel{fig-good-arc}{{8.3}{78}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.6.5}Restarting the data reduction system}{79}}
\@writefile{toc}{\contentsline {section}{\numberline {8.7}The Data Reduction Process in More Detail}{79}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.7.1}File Name Conventions}{79}}
\newlabel{sec-name-conv}{{8.7.1}{79}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.7.2}Calibration Files}{79}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.7.3}Combining Offset Sky Files}{80}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.7.4}Tram-Line Maps}{80}}
\newlabel{sec-tram-map}{{8.7.4}{80}}
\@writefile{toc}{\contentsline {subsubsection}{Plotting the Tram-Line Map}{80}}
\newlabel{plot-tram-map}{{8.7.4}{80}}
\@writefile{toc}{\contentsline {subsubsection}{Creating a New Fibre Position File}{81}}
\newlabel{sec-find-fibres}{{8.7.4}{81}}
\@writefile{toc}{\contentsline {subsubsection}{Reducing the Flat Field}{82}}
\@writefile{toc}{\contentsline {subsubsection}{Tram Maps with Other Files}{82}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.7.5}Fibre Extraction}{82}}
\@writefile{toc}{\contentsline {subsubsection}{Background Subtraction}{83}}
\@writefile{toc}{\contentsline {subsubsection}{Fitting Profiles}{83}}
\@writefile{toc}{\contentsline {subsubsection}{Extracting Spectra}{83}}
\@writefile{toc}{\contentsline {subsubsection}{Plotting Fits}{83}}
\@writefile{toc}{\contentsline {subsubsection}{Cosmic Ray Rejection}{84}}
\@writefile{toc}{\contentsline {subsubsection}{Fibre Overlap}{84}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.7.6}Dividing by Fibre Flat Field}{84}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.7.7}Wavelength Calibration}{84}}
\newlabel{sec-wave-cal}{{8.7.7}{84}}
\@writefile{lof}{\contentsline {figure}{\numberline {8.4}{\ignorespaces Appearance of an incorrectly reduced 2dF arc exposure. The arc lines in different fibres do not line up. Such a result is usually caused by incorrect wavelength or grating information in the header, or (as in this example) by use of the wrong arc line list. Compare with figure\nobreakspace  {}8.3\hbox {}.}}{85}}
\newlabel{fig-bad-arc}{{8.4}{85}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.7.8}Fibre Throughput Calibration}{86}}
\@writefile{toc}{\contentsline {subsubsection}{Offset Sky Method}{86}}
\@writefile{toc}{\contentsline {subsubsection}{Sky Lines}{87}}
\@writefile{toc}{\contentsline {subsubsection}{Finally ...}{87}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.7.9}Sky Subtraction}{87}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.7.10}Combining Reduced Spectra}{88}}
\newlabel{sec-combine-reduced}{{8.7.10}{88}}
\@writefile{toc}{\contentsline {subsubsection}{Continuum Level Adjustment}{88}}
\@writefile{toc}{\contentsline {subsubsection}{Flux Weighting Option}{89}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.7.11}Summary of Data Reduction Sequence}{90}}
\@writefile{toc}{\contentsline {section}{\numberline {8.8}2dF Data Headers and the 2dfinfo command}{91}}
\@writefile{toc}{\contentsline {section}{\numberline {8.9}A Tour of the User Interface}{92}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.9.1}The Menus}{92}}
\@writefile{toc}{\contentsline {subsubsection}{The File Menu}{92}}
\@writefile{toc}{\contentsline {subsubsection}{The Options Menu}{92}}
\@writefile{toc}{\contentsline {subsubsection}{The Commands Menu}{92}}
\@writefile{toc}{\contentsline {subsubsection}{The Help Menu}{93}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.9.2}The Automatic Reduction Section}{93}}
\@writefile{toc}{\contentsline {subsubsection}{The Setup Button}{93}}
\@writefile{toc}{\contentsline {subsubsection}{The Start Button}{93}}
\@writefile{toc}{\contentsline {subsubsection}{The Stop Button}{93}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.9.3}The Data Page}{93}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.9.4}The Parameter Pages}{94}}
\@writefile{toc}{\contentsline {subsubsection}{General}{94}}
\@writefile{toc}{\contentsline {subsubsection}{Combine}{94}}
\@writefile{toc}{\contentsline {subsubsection}{Extract}{95}}
\@writefile{toc}{\contentsline {subsubsection}{SkySub}{95}}
\@writefile{toc}{\contentsline {subsubsection}{Plots}{96}}
\@writefile{toc}{\contentsline {subsubsection}{Hard}{96}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.9.5}The Execution Task Section}{96}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.9.6}The Plot Windows}{97}}
\@writefile{toc}{\contentsline {subsubsection}{Interacting with Plots}{97}}
\@writefile{toc}{\contentsline {subsubsection}{Plotting Fibre Spectra}{97}}
\@writefile{toc}{\contentsline {subsubsection}{Changing the Size of the Plot Window}{97}}
\@writefile{toc}{\contentsline {subsubsection}{Multiple Plots}{97}}
\@writefile{lof}{\contentsline {figure}{\numberline {8.5}{\ignorespaces The Plot Window}}{98}}
\newlabel{fig-drplot}{{8.5}{98}}
\@writefile{toc}{\contentsline {subsubsection}{Making Hard Copies of the Screen Plot}{99}}
\@writefile{toc}{\contentsline {section}{\numberline {8.10}Old 2dF Data}{99}}
\newlabel{old-data}{{8.10}{99}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.10.1}Fits Header Items}{99}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.10.2}Object and Sky Fibre information}{99}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.10.3}Setting the Class of the Data Files}{100}}
\newlabel{sec-file-classes}{{8.10.3}{100}}
\@writefile{toc}{\contentsline {subsection}{\numberline {8.10.4}Data Contamination by Artificial Lights}{100}}
\@writefile{lof}{\contentsline {figure}{\numberline {8.6}{\ignorespaces Fibre spectrum contaminated by neon emission from a neon lamp on the 2dF electronics}}{101}}
\newlabel{fig-neon-lamp}{{8.6}{101}}
\@writefile{lof}{\contentsline {figure}{\numberline {8.7}{\ignorespaces Fibre spectrum contaminated by emission from a red light emitting diode on the 2dF electronics. The LED causes the broad emission feature at 6600\r A.}}{102}}
\newlabel{fig-red-led}{{8.7}{102}}
\@writefile{toc}{\contentsline {chapter}{\numberline {9}2dF Gratings}{103}}
\@writefile{lof}{\addvspace {10\p@ }}
\@writefile{lot}{\addvspace {10\p@ }}
\newlabel{sec-gratings}{{9}{103}}
\@writefile{toc}{\contentsline {subsection}{\numberline {9.0.5}Grating Efficiencies}{103}}
\newlabel{lowgrating}{{9.0.5}{104}}
\@writefile{lof}{\contentsline {figure}{\numberline {9.1}{\ignorespaces Efficiencies for Low Dispersion Gratings}}{104}}
\newlabel{medgrating}{{9.0.5}{105}}
\@writefile{lof}{\contentsline {figure}{\numberline {9.2}{\ignorespaces Efficiencies for Medium Dispersion Gratings}}{105}}
\newlabel{highgrating}{{9.0.5}{106}}
\@writefile{lof}{\contentsline {figure}{\numberline {9.3}{\ignorespaces Efficiencies for Low Dispersion Gratings}}{106}}
\newlabel{compgrating}{{9.0.5}{107}}
\@writefile{lof}{\contentsline {figure}{\numberline {9.4}{\ignorespaces Comparison of Efficiencies for 270R and 316R Gratings}}{107}}
\@writefile{toc}{\contentsline {chapter}{\numberline {10}Instrument Sensitivity}{108}}
\@writefile{lof}{\addvspace {10\p@ }}
\@writefile{lot}{\addvspace {10\p@ }}
\@writefile{toc}{\contentsline {section}{\numberline {10.1}High Resolution}{108}}
\@writefile{toc}{\contentsline {section}{\numberline {10.2}Low Resolution}{108}}
\@writefile{toc}{\contentsline {chapter}{\numberline {11}Appendix: More About the ADC}{109}}
\@writefile{lof}{\addvspace {10\p@ }}
\@writefile{lot}{\addvspace {10\p@ }}
\newlabel{moreaboutadc}{{11}{109}}
\@writefile{lof}{\contentsline {figure}{\numberline {11.1}{\ignorespaces Showing how FPI star images look for nulled, correct, and incorrect ADC settings. {\bf  These images were taken with a non-standard BG1 (UV+near-IR passband) filter, which blocks the V band light.}}}{110}}
\newlabel{adc_final}{{11.1}{110}}