[Skip to Content]


General Links
Professional Links
Australian Human Resources Institute Diversity Awards 2013 Finalist

CYCLOPS2 fibre-feed to UCLES

In Brief

CYCLOPS2 is a Cassegrain fibre-feed for the UCLES spectrograph. It provides better throughput than the current Coude mirror train, while also reformatting an approximately 3 arcsec diameter aperture on the sky into an 14 x 0.6 arcsec pseudo-slit at the entrance of the UCLES spectrograph. It is known that for a wavelength configuration centred on 5000-6000A that CYCLOPS delivers 30% more photons at 50% higher resolution than the equivalent 31 l/mm set-up with a 1 arcsec slit. There is also a fibre for simultaneous wavelength calibration.

Note that CYCLOPS2 can not be used with UHRF.

More detailed information can be found on the CYCLOPS2 web page at UNSW.

Status (as of January 2013)

CYCLOPS2 finished its commissioning in Semester 13A with 17 working fibres - 16 for the science target, with a field of view of ~3", and one for simultaneous wavelength calibration.

Status (as of February 2011)

Prospective users should note that at the present time:

Performance Assumptions

Astronomers proposing to use CYCLOPS2 should note and assume the following for the purposes of preparing proposals:

Astronomers interested in more details are encouraged to contact the UCLES Support Astronomer (Gayandhi de Silva, AAO, gdesliva -@- aao.gov.au) or the CYCLOPS2 Project Scientist (Chris Tinney, UNSW, c.tinney -@- unsw.edu.au) to further discuss their plans if they require more information.

Operational Matters

CYCLOPS2 cannot be interchanged with the UCLES Coude-train feed without making a top-end change. They therefore cannot be interchanged during a night, and in fact can only be interchanged subject to the AAO's usual requirements on instrument changes.

CYCLOPS2 can not be interchanged with IRIS2 during a night.

As far as the UCLES spectrograph is concerned, CYCLOPS2 data will be very similar to any other 79 l/mm echelle data. So data reduction will very closely follow that required with normal UCLES 79 l/mm echelle data - proposing observers should plan on using existing reduction suites for this purpose.

CYCLOPS2 has a slightly modified graphical user interface (GUI) compared to that currently used for UCLES (i.e. disabling the beam rotator and mirror slide), and a small additional GUI for controlling the CYCLOPS2 fibre flat-field, ThAr lamps and fibre vibrator. These changes are small and proposing observers can prepare by reading the documentation for regular UCLES observations.

Further Information

Return to UCLES instrument page

Sarah Martell, AAT Technical Secretary, aatts -@- aao.gov.au