next up previous contents
Next: The Focal Plane Imager Up: The Control Task Previous: ADC Control   Contents

AAOmega Spectrograph Control

The AAOmega spectrograph control window is shown in Figure [*]. The window provides a display of the setup of the spectrograph (gratings, focus etc..). Status information (open doors, dark-slide positions, temperature monitors etc.) can be viewed by selecting the Full Status button, which will bring up the Status dialogue also shown in Figure [*].

Figure: The Spectrograph Control window (left) and the spectrograph status window (right). Both are obtained by clicking on respective buttons (more and Full Status) in the Spectrograph section of the main Control Task window (Figure [*]).
\begin{figure}\psfig{file=pics/spectro.eps,width=5cm}\psfig{file=pics/spectro_stat.eps,width=5cm}\end{figure}

The spectro control GUI provides the following functions:

Grating selection is auto-sensed, and indicated in the dialogue.

Figure: The AAOmega Blue arm calibration GUI. An identical dialogue is available to control the Red arm.
\begin{figure}\psfig{file=pics/spectro_calib.eps,width=7cm}\end{figure}


next up previous contents
Next: The Focal Plane Imager Up: The Control Task Previous: ADC Control   Contents
Rob Sharp 2006-10-30